▼Others
We also offer assembly service and various types of pre-assembled products.
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
We will guide you through Tools for our multi-pin terminals.
▼Insertion Tool (IST16)
This tool can be used to assembly a socket contact into an insert.
When you use, lightly put crimped Contacts into the insert and then push it in, or insert with the cable attached to the center groove of IST16.
Improves work efficiency, especially when using thin cables
▼Pulling tool (EXT16)
This tool is used to pull out the socket contact from the air side plug and vacuum side insert.
It can be used for both BURNDY and MS types.
▼Crimping tool (CT2313)
For AWG #28 to #12.
Crimp the socket contact from 4 directions at the same time.
Crimping from 4 points allows smooth insertion and removal of plugs and inserts without collapsing.
▼Locator for CT2313 (LCT**)
The locator can be attached to the Crimping tool (CT2313) to easily position the socket contact for crimping.
Please select one of the following to match the socket contact to be used.
・LCT01 (Navy): for SVC16, SVC16-A14, SVC16-L18
・LCT02 (wine red): for Pin contacts
・LCT03 (light blue): for Thermocouple socket contacts
・LCT04 (silver): for SVC24CU
・LCT05 (brown): for SVC10D、SVC10DCOAX
*Please consult us about SVC10M, SAC10M and SVC10 crimping
▼Others
If you have any questions about our products, please feel free to contact us by clicking the "Contact Us" button.
▼Cable Bears
Cable bearers (cable chains) that can be used in a vacuum
Protects wiring and piping in moving equipment from external forces and snagging to ensure safe and smooth operation.
Body material: PEEK
When extending the length, PCTE can be used by connecting PCTE.
PCTE is for termination.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
▼Cable Bears
Cable bearers (cable chains) that can be used in a vacuum
Protects wiring and piping in moving equipment from external forces and snagging to ensure safe and smooth operation.
Body material: PEEK
When extending the length, PCTE can be used by connecting PCTE.
PCTE is for termination.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
※ Please note that it may take several days after applying for a member registration until the registration is complete. Please note that we reserve the right to refuse your application at our discretion.
Feedthrough
Isolator
Viewport
Vacuum Component
Vacuum Valve
Motion Feedthroughs
Others
Product code :14118
Product code :16793
Product code :14914
Product code :10052
Product code :16107
Product code :16108
Product code :16109
Product code :16110
Product code :11155
Product code :28018
Product code :28019