Vacuum Components chain clamp rubber O-ring seals link (FRP)　Product List Vacuum Component 

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)

▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

For precision cleaning requests, please click here.

To distribute forces in a plurality of links, the way to push uniformly tightened, can now more reliable sealing when compared to a conventional two cracks C-shaped clamp. When tightened, the design of the knob, which was conscious of ergonomics that does not take the burden on the hand, not darkness to attract a lot of users around the world. And blessed with easy wearing state students, it does not cause galling of the flange. Since the collapse the way of the O-ring also becomes uniform, it is also possible to extend the life of the O-ring. In addition, since it has a durability against vibration, never clamp is loosened even if there is vibration.

To distribute forces in a plurality of links, the way to push uniformly tightened, can now more reliable sealing when compared to a conventional two cracks C-shaped clamp. When tightened, the design of the knob, which was conscious of ergonomics that does not take the burden on the hand, not darkness to attract a lot of users around the world. And blessed with easy wearing state students, it does not cause galling of the flange. Since the collapse the way of the O-ring also becomes uniform, it is also possible to extend the life of the O-ring. In addition, since it has a durability against vibration, never clamp is loosened even if there is vibration.

To distribute forces in a plurality of links, the way to push uniformly tightened, can now more reliable sealing when compared to a conventional two cracks C-shaped clamp. When tightened, the design of the knob, which was conscious of ergonomics that does not take the burden on the hand, not darkness to attract a lot of users around the world. And blessed with easy wearing state students, it does not cause galling of the flange. Since the collapse the way of the O-ring also becomes uniform, it is also possible to extend the life of the O-ring. In addition, since it has a durability against vibration, never clamp is loosened even if there is vibration.

To distribute forces in a plurality of links, the way to push uniformly tightened, can now more reliable sealing when compared to a conventional two cracks C-shaped clamp. When tightened, the design of the knob, which was conscious of ergonomics that does not take the burden on the hand, not darkness to attract a lot of users around the world. And blessed with easy wearing state students, it does not cause galling of the flange. Since the collapse the way of the O-ring also becomes uniform, it is also possible to extend the life of the O-ring. In addition, since it has a durability against vibration, never clamp is loosened even if there is vibration.