About 8,000 types of vacuum components in stock at all times.Business Hours： 9:00-18:00, excluding weekends and holidays
- Inquiry Web Conference
- Tokyo 03-3270-5761 Osaka 06-6131-4751
- Contact Us
- FAQ
-
Feedthrough
-
Isolator
-
Viewport
-
Vacuum Component
-
Vacuum Valve
-
Vented Screw
-
Others
- Quick Order
- CAD · Catalog
- About Us
- Create Account
- Sign In
- User Guide
- FAQ
- Contact Us
- Catalog Download
- Company Profile
- Example
- Agreement
- Site Map
(Hours 9:00 to 18:00 except Saturdays, Sundays, and holidays)
- Cosmotec for Vacuum Components
- Vacuum Component
- Clamp / Bolt
- Clamp (NW / KF standard)
- Vacuum Components chain clamp rubber O-ring seal
Vacuum Components chain clamp rubber O-ring seal Product List Vacuum Component
Category 3Matter
Subcategory 6Matter (1 ~6 )
-
Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ -
Link FRP strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt FRP Maximum temperature 60℃ The lowest temperature -20℃ RoHS2 corresponding ○ -
Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ -
Link Aluminum Knob / nut FRP (knob) Clamping bolt FRP Maximum temperature 150℃ The lowest temperature -20℃ Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only Pressurization ○ Non-magnetic ○ Radiation resistance ○ chemical resistance △ Clean Room ○ Insulation ○ METHOD tightening Hand tighten RoHS2 corresponding ○ -
Link Aluminum Knob / nut Stainless steel (nut) Clamping screw stainless Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -271℃ Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only Pressurization ○ Non-magnetic ○ Radiation resistance ○ chemical resistance ○ Clean Room △ Insulation ○ METHOD tightening Torque Wrench RoHS2 corresponding ○ -
Link stainless strap stainless Knob / nut Stainless steel (bolt) Clamping screw stainless Maximum temperature 350℃ The lowest temperature -271℃ Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only Pressurization ○ Radiation resistance ○ chemical resistance ○ Clean Room △ Insulation ○ METHOD tightening Torque Wrench RoHS2 corresponding ○
Products 71Matter (1 ~20 )
- Displayed results
- Display switching
-
Product code :21149
Model:NW16CC▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ NW/KF 16 L 122 N 60 Number of links 3 -
Product code :21150
Model:NW25CC▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 -
Product code :21151
Model:NW40CC▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 -
Product code :21152
Model:NW50CC▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ NW/KF 50 L 156 N 105 Number of links 5
-
Product code :27339
Model:NW63CC▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link Aluminum strap SUS 316L Knob / nut FRP Clamping screw SUS 316L Clamping bolt Aluminum Maximum temperature 100℃ The lowest temperature -20℃ RoHS2 corresponding ○ NW/KF 63 L 170 N 120 Number of links 6 -
Product code :30012
Model:30.111.716▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 16 L 122 N 60 Number of links 3 The color of the link 黒色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap Steel nickel plate -
Product code :30025
Model:30.131.816▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 16 L 122 N 60 Number of links 3 The color of the link 白色 knob color white Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap stainless -
Product code :30035
Model:30.132.816▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 16 L 122 N 60 Number of links 3 The color of the link 白色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit YES strap stainless
-
Product code :30227
Model:30.016094.100▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 16 L 122 N 60 Number of links 3 The color of the link 茶色 knob color 茶色 Maximum temperature 200℃ The lowest temperature -20℃ type 超高温 torque limit NONE strap stainless -
Product code :30013
Model:30.111.725▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 黒色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap Steel nickel plate -
Product code :30026
Model:30.131.825▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 白色 knob color white Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap stainless -
Product code :30036
Model:30.132.825▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 白色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit YES strap stainless
-
Product code :30031
Model:30.131.925▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 黒色 knob color white Maximum temperature 100℃ The lowest temperature -20℃ Use temperature (Supplement) It is within 12 hours allowed type 高温 torque limit NONE strap stainless -
Product code :30040
Model:30.132.925▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 黒色 knob color 黒色 Maximum temperature 100℃ The lowest temperature -20℃ Use temperature (Supplement) It is within 12 hours allowed type 高温 torque limit YES strap stainless -
Product code :30002
Model:30.025094.100▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 25 L 127 N 70 Number of links 4 The color of the link 茶色 knob color 茶色 Maximum temperature 200℃ The lowest temperature -20℃ type 超高温 torque limit NONE strap stainless -
Product code :30018
Model:30.111.840▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 The color of the link 白色 knob color white Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap stainless
-
Product code :30014
Model:30.111.740▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 The color of the link 黒色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap Steel nickel plate -
Product code :30027
Model:30.131.840▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 The color of the link 白色 knob color white Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit NONE strap stainless -
Product code :30037
Model:30.132.840▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 The color of the link 白色 knob color 黒色 Maximum temperature 60℃ The lowest temperature -20℃ Use temperature (Supplement) To within 5 hours allowed up t type standard torque limit YES strap stainless -
Product code :30032
Model:30.131.940▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.Link FRP Knob / nut FRP Clamping screw stainless Available pressure Atmospheric pressure ~ 10<sup> Corresponding seal Elastomer seal only METHOD tightening Hand tighten Pressurization ○ Non-magnetic ○ chemical resistance △ Insulation ○ RoHS2 corresponding ○ NW/KF 40 L 141 N 85 Number of links 4 The color of the link 黒色 knob color white Maximum temperature 100℃ The lowest temperature -20℃ Use temperature (Supplement) It is within 12 hours allowed type 高温 torque limit NONE strap stainless
