About 8,000 types of vacuum components in stock at all times.Business Hours: 9:00-18:00, excluding weekends and holidays

Product Category
  • Feedthrough Feedthrough
    Feedthrough
  • Isolator Isolator
    Isolator
  • Viewport Viewport
    Viewport
  • Vacuum Component Vacuum Component
    Vacuum Component
  • Vacuum Valve Vacuum Valve
    Vacuum Valve
  • Vented Screw Vented Screw
    Vented Screw
  • Others Others
    Others

Sale】34.160001.341.116 Aluminum Edge Seal NW160

【セール品】34.160001.341.116 アルミエッジシール NW160

Mouse over the image to enlarge it

【セール品】34.160001.341.116 アルミエッジシール NW160
share the productshare the product
Product code :30373 Model:34.341.116

▼NW/KF Aluminum Edge Seal
NW flange can be used for ultra-high vacuum (in the 10-⁹Pa range).
One-time use only, since the edge is crushed and sealed.
Use metal seal clamps.
High temperature 150°C
Low temperature -270°C
Suitable for radiation resistant and nuclear applications
Clean room applications
Outer type is for pressurized applications
※Not for use with glass or aluminum flanges.

▼Products with similar purpose: Introduction of CeFiX® system
Metal seal can be introduced with the same diameter as NW piping
Ultra-high vacuum compatible (10-⁹Pa range)
The taper sealing method of the CeFiX® system, which does not have a knife-edge bite, allows for repeated use of the seal about 10 times.
 (*The number of times it can be used repeatedly depends on the usage conditions and is not a guaranteed value.
Can be used in radiation resistant areas.
Select according to operating temperature, pressure range, and application.
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250

▼Other
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

Click here to request precision cleaning.

Basic Information
Seal / gasket material Aluminum
Maximum temperature 150℃
The lowest temperature -270℃
Available pressure Atmospheric pressure ~ 10
Leak rate <1.3x10-9Pa・㎥/sec
Pressurization -
Non-magnetic
Radiation resistance
chemical resistance
Clean Room
RoHS2 corresponding
Inquiry for this product
share the productshare the product
front.product.product_code
Model
NW/KF A C C1 J B K shape
Stock & Delivery
front.product.price
front.product.tax_included2
160 - - - - - - outer
NW/KF A C C1 J B K shape
160 - - - - - - outer
Product code :30373    Model:34.341.116

Filter by model

フランジ

形状

【セール品】34.160001.341.116 アルミエッジシール NW160 admin.label.item.catalog_image
締結にはメタルシール用のクランプをご使用ください。
※Oリング用のクランプでは締め付けられません。

■締め付け時の注意
・フランジや配管のアライメントを確保してください(配管の設置場所が高所、斜めに取り付けの際はフランジが平行になるよう特にご注意下さい)。
・必ず規定トルク値で締結をお願いいたします。
・締結の際は、ゆっくりとボルトを締めていただくようお願いします。
 例:規定トルク値に到達するまでボルトを半回転づつ締めてください。上下にボルトがあるタイプも、規定トルク値に到達するま上下のボルトを交互に半回転ずつ締めて下さい。
・アルミエッジシールは1回限りの使用となります。CeFiXメタルシールは10回まで繰り返し使用ですが、回数はあくまで目安ですのでリークが見られた場合は都度新しいシールを使用して下さい。

■メタルシール使用時の相手側フランジの注意点
①Radius(R)(※非常に重要)
1.5mmもしくは0.06”
*もし、Rが上記値以外のフランジの場合、チェーンクランプが破損、及び十分に性能を発揮できない原因になります
②シール面の表面粗さ
N5(Ra=16μインチ)。また、傷、打痕なきこと。
③テーパー部分(15°)の表面粗さ
N6(Ra=32μインチ)。また、傷、打痕なきこと。
また、締結時は下記の点にご留意ください。
Shipping accepted on the day on orders until 17:00 Hours 9:00 to 18:00 except Saturdays, Sundays, and holidays
Contact Us
Please fill in the form below.
After confirming the content of your enquiry,
a representative will contact you.

To use this service, please login or register as a member.

Not a member yet?

Registering as a member gives you access to a number of useful features.

ぜひご登録ください!

※ Please note that it may take several days after applying for a member registration until the registration is complete. Please note that we reserve the right to refuse your application at our discretion.