About 8,000 types of vacuum components in stock at all times.Business Hours: 9:00-18:00, excluding weekends and holidays
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
Link | FRP |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | FRP |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
Link | Aluminum |
---|---|
Knob / nut | FRP (knob) |
Clamping bolt | FRP |
Maximum temperature | 150℃ |
The lowest temperature | -20℃ |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
Pressurization | ○ |
Non-magnetic | ○ |
Radiation resistance | ○ |
chemical resistance | △ |
Clean Room | ○ |
Insulation | ○ |
METHOD tightening | Hand tighten |
RoHS2 corresponding | ○ |
Link | Aluminum |
---|---|
Knob / nut | Stainless steel (nut) |
Clamping screw | stainless |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -271℃ |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
Pressurization | ○ |
Non-magnetic | ○ |
Radiation resistance | ○ |
chemical resistance | ○ |
Clean Room | △ |
Insulation | ○ |
METHOD tightening | Torque Wrench |
RoHS2 corresponding | ○ |
Link | stainless |
---|---|
strap | stainless |
Knob / nut | Stainless steel (bolt) |
Clamping screw | stainless |
Maximum temperature | 350℃ |
The lowest temperature | -271℃ |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
Pressurization | ○ |
Radiation resistance | ○ |
chemical resistance | ○ |
Clean Room | △ |
Insulation | ○ |
METHOD tightening | Torque Wrench |
RoHS2 corresponding | ○ |
▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals
Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
NW/KF | 16 |
L | 122 |
N | 60 |
Number of links | 3 |
▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals
Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals
Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals
Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
NW/KF | 50 |
L | 156 |
N | 105 |
Number of links | 5 |
▼ Chain clamp SUS type
For NW/KF flange, For CeFiX® flange
Balanced clamping with multiple links, more firmly secured than general 2-point clamps
Strong against vibration and hard to loosen
Easy installation even in tight spaces
Nut-tightening type available for torque control
Can be used with Aluminum Edge Seals
Compatible with cryogenic temperatures (-270°C)
Rust-free and suitable for food and beverage applications
▼Compatible with CeFiX® flanges
Compatible flanges (CeFiX®): 16, 25, 40, 50, 63, 80, 100, 160, 200, 250
Use specific chain clamps for CeFiX® flanges.
※NW40, 63 are available as dedicated CeFiX® types with different number of links. Please note
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal/metal seal/CeFiX compatible
Link materials include resin, SUS, and aluminum. Please select according to operating temperature and corrosion resistance.
Knobs can be hand-turned (resin) or torque wrench-tightened (metal).
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | Aluminum |
---|---|
strap | SUS 316L |
Knob / nut | FRP |
Clamping screw | SUS 316L |
Clamping bolt | Aluminum |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
RoHS2 corresponding | ○ |
NW/KF | 63 |
L | 170 |
N | 120 |
Number of links | 6 |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 16 |
L | 122 |
N | 60 |
Number of links | 3 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | Steel nickel plate |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 16 |
L | 122 |
N | 60 |
Number of links | 3 |
The color of the link | 白色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | YES |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 16 |
L | 122 |
N | 60 |
Number of links | 3 |
The color of the link | 茶色 |
knob color | 茶色 |
Maximum temperature | 200℃ |
The lowest temperature | -20℃ |
type | 超高温 |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | Steel nickel plate |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 白色 |
knob color | white |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 白色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | YES |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | white |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | It is within 12 hours allowed |
type | 高温 |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | It is within 12 hours allowed |
type | 高温 |
torque limit | YES |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 25 |
L | 127 |
N | 70 |
Number of links | 4 |
The color of the link | 茶色 |
knob color | 茶色 |
Maximum temperature | 200℃ |
The lowest temperature | -20℃ |
type | 超高温 |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
The color of the link | 白色 |
knob color | white |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | Steel nickel plate |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
The color of the link | 白色 |
knob color | white |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | white |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | It is within 12 hours allowed |
type | 高温 |
torque limit | NONE |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 40 |
L | 141 |
N | 85 |
Number of links | 4 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 100℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | It is within 12 hours allowed |
type | 高温 |
torque limit | YES |
strap | stainless |
▼ Chain clamp plastic type
For NW/KF flange
More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
(Resin links vary depending on the applicable temperature.
Resistant to vibration and difficult to loosen.
Easy installation even in tight spaces
Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
Hand-tightening type only (torque control is not available)
▼The following types of chain clamps are standardized (List)
Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
Use specific chain clamps for CeFiX® flanges.
※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.
▼Others
If you have any questions about our products, please feel free to contact us from the "Inquiry" button.
For precision cleaning requests, please click here.
Link | FRP |
---|---|
Knob / nut | FRP |
Clamping screw | stainless |
Available pressure | Atmospheric pressure ~ 10<sup> |
Corresponding seal | Elastomer seal only |
METHOD tightening | Hand tighten |
Pressurization | ○ |
Non-magnetic | ○ |
chemical resistance | △ |
Insulation | ○ |
RoHS2 corresponding | ○ |
NW/KF | 50 |
L | 156 |
N | 105 |
Number of links | 5 |
The color of the link | 黒色 |
knob color | 黒色 |
Maximum temperature | 60℃ |
The lowest temperature | -20℃ |
Use temperature (Supplement) | To within 5 hours allowed up t |
type | standard |
torque limit | NONE |
strap | stainless |