About 8,000 types of vacuum components in stock at all times.Business Hours: 9:00-18:00, excluding weekends and holidays

Product Category
  • Feedthrough Feedthrough
    Feedthrough
  • Isolator Isolator
    Isolator
  • Viewport Viewport
    Viewport
  • Vacuum Component Vacuum Component
    Vacuum Component
  • Vacuum Valve Vacuum Valve
    Vacuum Valve
  • Vented Screw Vented Screw
    Vented Screw
  • Others Others
    Others

Vacuum Components outer guide with a center ring (NW / KF standard) Product List Vacuum Component

Subcategory 3Matter (1 ~3 )

Products 47Matter (1 ~20 )

Displayed results
Display switching
  • Product code :30253
    Model:34.121.516

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 16
    A 30
    C 16
    J 23
    The inner ring SUS 316L
    The outer ring Aluminum
    3,700JPY (with tax 4,070JPY)
    Inquiry for this product
  • Product code :30238
    Model:34.121.716

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 16
    The inner ring Aluminum
    The outer ring Aluminum
    800JPY (with tax 880JPY)
    Inquiry for this product
  • Product code :30145
    Model:34.121.816

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 16
    A 30
    C 16
    J 23
    The inner ring Aluminum
    The outer ring Aluminum
    3,200JPY (with tax 3,520JPY)
    Inquiry for this product
  • Product code :30132
    Model:34.121.325

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 25
    A 40
    C 24
    J 33
    The inner ring SUS 316L
    The outer ring SUS 316L
    4,900JPY (with tax 5,390JPY)
    Inquiry for this product
  • Product code :30138
    Model:34.121.525

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 25
    A 40
    C 24
    J 33
    The inner ring SUS 316L
    The outer ring Aluminum
    3,900JPY (with tax 4,290JPY)
    Inquiry for this product
  • Product code :30146
    Model:34.121.825

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 25
    A 40
    C 24
    J 33
    The inner ring Aluminum
    The outer ring Aluminum
    3,900JPY (with tax 4,290JPY)
    Inquiry for this product
  • Product code :30134
    Model:34.121.340

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 40
    A 55
    C 40
    J 48
    The inner ring SUS 316L
    The outer ring SUS 316L
    6,700JPY (with tax 7,370JPY)
    Inquiry for this product
  • Product code :30139
    Model:34.121.540

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 40
    A 55
    C 40
    J 48
    The inner ring SUS 316L
    The outer ring Aluminum
    4,800JPY (with tax 5,280JPY)
    Inquiry for this product
  • Product code :30241
    Model:34.121.740

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 40
    The inner ring Aluminum
    The outer ring Aluminum
    800JPY (with tax 880JPY)
    Inquiry for this product
  • Product code :30147
    Model:34.121.840

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 40
    A 55
    C 40
    J 48
    The inner ring Aluminum
    The outer ring Aluminum
    4,800JPY (with tax 5,280JPY)
    Inquiry for this product
  • Product code :30136
    Model:34.121.350

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 50
    A 75
    C 50
    J 59
    The inner ring SUS 316L
    The outer ring SUS 316L
    8,400JPY (with tax 9,240JPY)
    Inquiry for this product
  • Product code :30140
    Model:34.121.550

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 50
    A 75
    C 50
    J 59
    The inner ring SUS 316L
    The outer ring Aluminum
    5,800JPY (with tax 6,380JPY)
    Inquiry for this product
  • Product code :30260
    Model:34.121.750

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 50
    The inner ring Aluminum
    The outer ring Aluminum
    1,400JPY (with tax 1,540JPY)
    Inquiry for this product
  • Product code :30191
    Model:34.212.E08

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 80
    The inner ring SUS 304
    The outer ring Aluminum
    4,500JPY (with tax 4,950JPY)
    Inquiry for this product
  • Product code :30192
    Model:34.212.E10

    ▼NW/KF Center Ring
    For NW/KF flange (metal piping)
    One-touch connection with inner ring guide
    With outer ring can be used for high pressure applications.

    ▼The following types are standardized (List)
    Applicable flange (NW): 10, 16, 25, 40, 50
    Guide material: SUS, Teflon, aluminum
    O-ring material: Viton, Nitrile, Karlez®, FEP
    O-ring (Viton® / Nitrile)
    ※For glass piping (here)

    ▼We also offer the following products
    Blank type: Processable type without a hole in the center
    Aluminum edge seal: Ultra high vacuum even with NW flange ( 10-⁹Pa range) even with NW flanges (one-time use only, use clamp for metal seal)
    Center Ring with Mesh: Mesh to prevent contamination
    Conversion center ring: Converts between NW10 and NW16 without inserting nipples, etc.

    ▼Options
    We can also provide drilling (orifice machining, etc.) and other options for blank types. Please contact us from the "Inquiry" button on the right side of the page.

    For precision cleaning requests, click here.

    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Leak rate <1.3x10<sup>-7</sup>Pa・㎥/sec
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 100
    The inner ring SUS 304
    The outer ring Aluminum
    6,200JPY (with tax 6,820JPY)
    Inquiry for this product
  • Product code :30195
    Model:34.289.108

    ▼NW/KF Outer ring Aluminum
    For NW/KF flange (metal piping)
    Use outer ring when used in pressurized (internal pressure) environment.
    Applicable flanges (NW): 80, 100, 125, 160, 200, 250

    ▼ Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Seal / gasket material Aluminum
    Maximum temperature 200℃
    The lowest temperature -50℃
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 80
    J 98
    E 112
    4,200JPY (with tax 4,620JPY)
    Inquiry for this product
  • Product code :30855
    Model:34.289.112

    ▼NW/KF Outer ring Aluminum
    For NW/KF flange (metal piping)
    Use outer ring when used in pressurized (internal pressure) environment.
    Applicable flanges (NW): 80, 100, 125, 160, 200, 250

    ▼ Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Seal / gasket material Aluminum
    Maximum temperature 200℃
    The lowest temperature -50℃
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 125
    J 144
    E 157
    6,000JPY (with tax 6,600JPY)
    Inquiry for this product
  • Product code :30197
    Model:34.289.116

    ▼NW/KF Outer ring Aluminum
    For NW/KF flange (metal piping)
    Use outer ring when used in pressurized (internal pressure) environment.
    Applicable flanges (NW): 80, 100, 125, 160, 200, 250

    ▼ Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Seal / gasket material Aluminum
    Maximum temperature 200℃
    The lowest temperature -50℃
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 160
    J 167
    E 182
    7,300JPY (with tax 8,030JPY)
    Inquiry for this product
  • Product code :30330
    Model:34.289.125

    ▼NW/KF Outer ring Aluminum
    For NW/KF flange (metal piping)
    Use outer ring when used in pressurized (internal pressure) environment.
    Applicable flanges (NW): 80, 100, 125, 160, 200, 250

    ▼ Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Seal / gasket material Aluminum
    Maximum temperature 200℃
    The lowest temperature -50℃
    Pressurization
    Non-magnetic
    Clean Room
    RoHS2 corresponding
    NW/KF 250
    J 275
    E 292
    13,900JPY (with tax 15,290JPY)
    Inquiry for this product
  • Product code :30153
    Model:34.122.616

    ▼NW/KF Center Ring
    One-touch connection with ring guide
    FEP O-rings have excellent chemical resistance and can be used from -50°C to 200°C.

    ▼Size and standard
    Applicable flanges (NW): 10, 16, 25, 40, 50, 63, 80, 100, 125
    Guide material: Teflon
    O-ring material: Viton, FEP
    *Thickness varies depending on the combination of pipes to be connected. Select from metal-to-metal, metal-to-glass, and glass-to-glass.
    *NW80 or higher for glass is common for both metal-glass and glass-glass.

    ▼Others
    SUS center ring is available (here)
    If you have any questions about our products, please feel free to contact us by clicking the "Inquiry" button.

    For precision cleaning, please click here.

    The outer ring Teflon ®
    The inner ring Teflon ®
    Non-magnetic
    chemical resistance
    Clean Room
    Insulation
    RoHS2 corresponding
    NW/KF 16
    A 30
    C 16
    E 32
    Seal / gasket material Viton ®
    Maximum temperature 200℃
    The lowest temperature -20℃
    Available pressure Atmospheric pressure ~ 10<sup>
    Classification For glass-to-glass connection
    The contents of goods With center ring
    4,400JPY (with tax 4,840JPY)
    Inquiry for this product
Shipping accepted on the day on orders until 17:00 Hours 9:00 to 18:00 except Saturdays, Sundays, and holidays
Contact Us
Please fill in the form below.
After confirming the content of your enquiry,
a representative will contact you.

To use this service, please login or register as a member.

Not a member yet?

Registering as a member gives you access to a number of useful features.

ぜひご登録ください!

※ Please note that it may take several days after applying for a member registration until the registration is complete. Please note that we reserve the right to refuse your application at our discretion.