About 8,000 types of vacuum components in stock at all times.Business Hours: 9:00-18:00, excluding weekends and holidays

Product Category
  • Feedthrough Feedthrough
    Feedthrough
  • Isolator Isolator
    Isolator
  • Viewport Viewport
    Viewport
  • Vacuum Component Vacuum Component
    Vacuum Component
  • Vacuum Valve Vacuum Valve
    Vacuum Valve
  • Vented Screw Vented Screw
    Vented Screw
  • Others Others
    Others

Vacuum Components chain clamp Product List Viewport

Products 30Matter (21 ~30 )

Displayed results
Display switching
  • Product code :30034
    Model:30.131.963

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 63
    L 170
    N 120
    Number of links 6
    The color of the link 黒色
    knob color white
    Maximum temperature 100℃
    The lowest temperature -20℃
    Use temperature (Supplement) It is within 12 hours allowed
    type 高温
    torque limit NONE
    strap stainless
    2,000JPY (with tax 2,200JPY)
    Inquiry for this product
  • Product code :30043
    Model:30.132.963

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 63
    L 170
    N 120
    Number of links 6
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 100℃
    The lowest temperature -20℃
    Use temperature (Supplement) It is within 12 hours allowed
    type 高温
    torque limit YES
    strap stainless
    8,900JPY (with tax 9,790JPY)
    Inquiry for this product
  • Product code :30229
    Model:30.063094.100

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 63
    L 170
    N 120
    Number of links 6
    The color of the link 茶色
    knob color 茶色
    Maximum temperature 200℃
    The lowest temperature -20℃
    type 超高温
    torque limit NONE
    strap stainless
    3,100JPY (with tax 3,410JPY)
    Inquiry for this product
  • Product code :30080
    Model:30.221.908

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 80
    D 248
    N 165
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 100℃
    The lowest temperature -20℃
    Use temperature (Supplement) It is within 12 hours allowed
    type 高温
    torque limit NONE
    strap stainless
    30,800JPY (with tax 33,880JPY)
    Inquiry for this product
  • Product code :30081
    Model:30.221.910

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 100
    D 262
    N 185
    Number of links 5
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 100℃
    The lowest temperature -20℃
    Use temperature (Supplement) It is within 12 hours allowed
    type 高温
    torque limit NONE
    strap stainless
    48,600JPY (with tax 53,460JPY)
    Inquiry for this product
  • Product code :30345
    Model:30.221.812

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 125
    D 283
    N 210
    Number of links 6
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 60℃
    The lowest temperature -20℃
    Use temperature (Supplement) To within 5 hours allowed up t
    type standard
    torque limit NONE
    strap stainless
    8,400JPY (with tax 9,240JPY)
    Inquiry for this product
  • Product code :30305
    Model:30.221.912

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 125
    D 283
    N 210
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 100℃
    The lowest temperature -20℃
    Use temperature (Supplement) It is within 12 hours allowed
    type 高温
    torque limit NONE
    strap stainless
    46,500JPY (with tax 51,150JPY)
    Inquiry for this product
  • Product code :30653
    Model:30.125094.200

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 125
    D 283
    N 210
    The color of the link 茶色
    knob color 茶色
    Maximum temperature 200℃
    The lowest temperature -20℃
    type 超高温
    torque limit NONE
    strap stainless
    29,400JPY (with tax 32,340JPY)
    Inquiry for this product
  • Product code :30079
    Model:30.221.816

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 160
    D 295
    N 235
    Number of links 7
    The color of the link 黒色
    knob color 黒色
    Maximum temperature 60℃
    The lowest temperature -20℃
    Use temperature (Supplement) To within 5 hours allowed up t
    type standard
    torque limit NONE
    strap stainless
    9,400JPY (with tax 10,340JPY)
    Inquiry for this product
  • Product code :30654
    Model:30.160094.200

    ▼ Chain clamp plastic type
    For NW/KF flange
    More firmly fixed than general two-point clamps because of balanced clamping with multiple links.
    The links are made of resin, so it can be used not only for SUS flanges but also for glass flanges, which are susceptible to breakage.
    (Resin links vary depending on the applicable temperature.
    Resistant to vibration and difficult to loosen.
    Easy installation even in tight spaces
    Standard and high-temperature types are equipped with an over-tightening prevention mechanism (torque limit).
    Hand-tightening type only (torque control is not available)

    ▼The following types of chain clamps are standardized (List)
    Applicable flanges (NW): 16, 25, 40, 50, 63, 80, 100, 125, 160, 200, 250
    Elastomer seal compatible/metal seal compatible/(CeFiX®) compatible
    Use specific chain clamps for CeFiX® flanges.
    ※NW40 and 63 are available with dedicated CeFiX® types with different number of links. Please note that
    The material of the link part can be resin, SUS, aluminum, etc. Select the material that best suits the operating temperature and corrosion resistance.
    Knobs are available in hand-turned (resin) and torque wrench-tightened (metal) types.

    ▼Others
    If you have any questions about our products, please feel free to contact us from the "Inquiry" button.

    For precision cleaning requests, please click here.

    Link FRP
    Knob / nut FRP
    Clamping screw stainless
    Available pressure Atmospheric pressure ~ 10<sup>
    Corresponding seal Elastomer seal only
    METHOD tightening Hand tighten
    Pressurization
    Non-magnetic
    chemical resistance
    Insulation
    RoHS2 corresponding
    NW/KF 160
    D 295
    N 235
    The color of the link 茶色
    knob color 茶色
    Maximum temperature 200℃
    The lowest temperature -20℃
    type 超高温
    103,200JPY (with tax 113,520JPY)
    Inquiry for this product
Shipping accepted on the day on orders until 17:00 Hours 9:00 to 18:00 except Saturdays, Sundays, and holidays
Contact Us
Please fill in the form below.
After confirming the content of your enquiry,
a representative will contact you.

To use this service, please login or register as a member.

Not a member yet?

Registering as a member gives you access to a number of useful features.

ぜひご登録ください!

※ Please note that it may take several days after applying for a member registration until the registration is complete. Please note that we reserve the right to refuse your application at our discretion.